1. Home
  2. Products
  3. Copper Brazing Alloy
  4. Silver Copper Phosphorus Brazing Alloy

Silver Copper Phosphorus Brazing Alloy

Application
Used for brazing copper and copper alloy parts.
Suitable for small and medium gap tie-ins.
Suitable for ample clearance tie-ins.
Designed for copper and brass parts with shocking activity in air conditioning, freezers, and copper alloy tie-in electric motors.
Low phosphor content for ample clearance and high phosphors content for gap tie-in.
Brazing eye-glasses frames and ERW.
Can be made into ribbon fill.
Used for copper and copper alloy tie-in electric motors and electrical appliances

Technical Parameters
Product Number Related Standard Chemical Composition(%) Melting Temperature
℉/℃
Ag Cu P Sn Impurities Solid Phase Liquid Phase
SAgP-1 CopSilos-1 0.9-1.1 Remainder 6.8-7.2 ≤0.15 1189/643 1464/796
SAgP-2A 1.8-2.2 Remainder 7.2-7.4 1193/645 1405/763
SAgP-2 BCu91PAg
BCuP-6
1.8-2.2 Remainder 6.8-7.2 1193/645 1454/790
SAgP-2B CP2 1.8-2.2 Remainder 6.6-6.8 1193/645 1500/816
SAgP-3 2.8-3.2 Remainder 6.5-6.8 1193/645 1472/800
SAgP-5 BCu88PAg
TC-315
BCuP-7
4.6-5.2 Remainder 6.8-7.1 1193/645 1409/765
SAgP-5A BCu89PAg
BCuP-3
4.8-5.2 Remainder 5.8-6.7 1189/643 1445/785
SAgP-5B 4.5-5.5 Remainder 5.5-5.7 1193/645 1535/835
SAgP-6 BCu87PAg
BCuP-4
5.8-6.2 Remainder 6.8-7.5 1193/645 1335/724
SAgP-6A 5.8-6.2 Remainder 6.5-6.7 1193/645 1317/714
SAgP-6B 5.8-6.2 Remainder 6.1-6.3 1193/645 1456/791
SAgP-10 BCu84PAg 9-11 Remainder 5.5-6.5 1193/645 1454/790
SAgP-15A 14.5-15.5 Remainder 7.1-7.4 1193/645 1205/652
SAgP-15 BCu80PAg
BCuP-5
14.5-15.5 Remainder 4.8-5.3 1193/645 1472/800
SAgP-18 17.5-18.5 Remainder 6.2-6.5 1193/645 1193/645
SAgP-20 Copsil20 19.5-20.5 Remainder 4.5-5.5 1193/645 1364/740
SAgP-25 Ncp25 24.5-25.5 Remainder 4.8-5.3 1193/645 1310/710

Characteristics
Solidus curve is lower than Cu-P brazing alloys, better wettability, strength and toughness.
Low melting point with an easy flow.
High liquidity due to low phosphor.
Increased Ag content for higher strength.
Good solderability, can be used instead of SAgP-15 (204).
Good brazing toughness.
Eutectic crystal brazing material, low plasticity.

Inquiry Form